RJ11 to RJ45 Plug Solution-Panasonic/Orchid PBX's

RJ11 to RJ45 plug solution for the Panasonic KX-TE308 & KX-TE824 PBX's (also compatible with the earlier KX-TA624, 616 & 1232 PBX's & the Orchid 308 PBX). The Panasonic/Orchid PBX's present their extension wiring on RJ11 plugs-as most installations would (& should!) utilise structured CAT5 cabling we have developed a kit to easily patch the PBX straight into the RJ45 cabling. At one end is the RJ11 plug that plugs directly into the Panasonic PBX, at the other is an RJ45 plug which simply plugs into your structured cabling (CAT5, CAT5 CAT6). At the floor outlet end simply use the supplied converter to convert the RJ45 outlet to a BT style socket. There are two versions of the kit-one for system telephones (Panasonic key system phones, eg KX-T7750-NOT for Orchid PBX!) and one for SLT (Single Line Telephone) phones-ie, any standard BT line compatible telephone. Also below is a patch lead to connect the CO (trunk) lines to the BT telephone network when the lines are terminated to a BT socket, eg, NTE5 instead of an IDC patch panel.

Complete kit for patching the extension ports of the Panasonic PBX to structured (CAT5/CAT6) RJ45 cabling. System phone use only.

Complete kit for patching the extension ports of the Panasonic/Orchid PBX to structured (CAT5/CAT6) RJ45 cabling. For any standard BT telephone.

Patch lead to connect the CO (trunk) lines of the PBX (Panasonic/Orchid) to the BT network if the incoming lines are terminated to BT sockets.