Following on from our successful BT to RJ45 Patch Kits we are pleased to announce our new RJ45 to RJ11 Patch Kit. Here's the scenario:- You have an ADSL line that is terminated by your patch cabinet, ideally you would like to patch the ADSL signal to one outlet on your network but would like to patch the voice signal somewhere else (for a FAX machine for example). Patch kit which allows you to patch the ADSL signal (RJ11) into one RJ45 port and the voice signal (BT) to another RJ45 port. Standard version allows 1 CAT5e/CAT6 RJ45 port to be patched for voice (ALL versions allow 1 port to be patched for ADSL ONLY). Fully compatible with FAX & PDQ machines etc. Ideal if the ADSL line is in your comms room but you would like a wireless router to be plugged in elsewhere for maximum signal strength.

RJ45 to RJ11 Patch Kit-Standard Version

Contains 1 ADSL Filter

1 RJ45 to RJ11 Patch Lead

1 RJ45 to RJ11 Converter

1 BT to RJ45 Patch Lead

1 RJ45 to BT Converter

Full Instructions

Remote Version-where the incoming ADSL line is not in the patch cabinet but is near to a free* CAT5e wall outlet. This version allows you to patch the ADSL line into the structured cabling-breaking out in the patch cabinet with an RJ45 ADSL micro filter to allow patching back into the structured cabling. A Generous 3M length RJ45 to BT patch lead is supplied to patch the incoming line into the structured cabling (Custom lengths are available). 1M patch leads are supplied to patch the ADSL signal and voice signal back into the structured cabling system (Again, custom lengths are available). An RJ45 to BT converter and our custom RJ45 to RJ11 converter patch the floor outlet to the desired port format for connection of equipment as normal.

(* If there is no free CAT5e port near by use our custom port doubler below to allow the patching of ADSL AND Data over one CAT5e port!)

RJ45 to RJ11 Patch Kit-Remote Version

Contains 1 RJ45 ADSL Filter

1 RJ45 to RJ11 Patch Lead

1 RJ45 to RJ11 Converter

1 BT to RJ45 Patch Lead

1 BT to RJ45 Patch Lead (3M)

1 RJ45 to BT Converter

Full Instructions

 What if you'd like more than one voice outlet? Not a problem! The kits below offer up to 4 voice outlets, privacy versions prevent other telephones listening in (all telephones still ring however).

Patch kit which allows you to patch the ADSL signal (RJ11) into one RJ45 port and the voice signal (BT) to another RJ45 port. Standard 2 user version allows 2 CAT5e/CAT6 RJ45 ports to be patched for voice & any outlet can access the telephone line at any given time (ALL versions allow 1 port to be patched for ADSL ONLY). Fully compatible with FAX & PDQ machines etc. Ideal if the ADSL line is in your comms room but you would like a wireless router to be plugged in elsewhere for maximum signal strength.

RJ45 to RJ11 Patch Kit-Standard 2 User Version

Contains 1 ADSL Filter

1 RJ45 to RJ11 Patch Lead

1 RJ45 to RJ11 Converter

2 BT to RJ45 Patch Leads

2 RJ45 to BT Converters

1 BT Double  Adaptor

Full Instructions

Standard 3 user version allows 3 CAT5e/CAT6 RJ45 ports to be patched for voice & any outlet can access the telephone line at any given time (ALL versions allow 1 port to be patched for ADSL ONLY). Fully compatible with FAX & PDQ machines etc. Ideal if the ADSL line is in your comms room but you would like a wireless router to be plugged in elsewhere for maximum signal strength.

RJ45 to RJ11 Patch Kit-Standard 3 User Version

Contains 1 ADSL Filter

1 RJ45 to RJ11 Patch Lead

1 RJ45 to RJ11 Converter

3 BT to RJ45 Patch Leads

3 RJ45 to BT Converters

1 BT Triple Adaptor

Full Instructions

Standard 4 user version allows 4 CAT5e/CAT6 RJ45 ports to be patched for voice & any outlet can access the telephone line at any given time (ALL versions allow 1 port to be patched for ADSL ONLY). Fully compatible with FAX & PDQ machines etc. Ideal if the ADSL line is in your comms room but you would like a wireless router to be plugged in elsewhere for maximum signal strength.

RJ45 to RJ11 Patch Kit-Standard 4 User Version

Contains 1 ADSL Filter

1 RJ45 to RJ11 Patch Lead

1 RJ45 to RJ11 Converter

4 BT to RJ45 Patch Leads

4 RJ45 to BT Converters

1 BT Quad Adaptor

Full Instructions

Privacy 2 user version allows 2 CAT5e/CAT6 RJ45 ports to be patched for voice but only 1 outlet can access the telephone line at one time (ALL versions allow 1 port to be patched for ADSL ONLY). Fully compatible with FAX & PDQ machines etc. Ideal if the ADSL line is in your comms room but you would like a wireless router to be plugged in elsewhere for maximum signal strength.

RJ45 to RJ11 Patch Kit-Privacy 2 User Version

Contains 1 ADSL Filter

1 RJ45 to RJ11 Patch Lead

1 RJ45 to RJ11 Converter

2 BT to RJ45 Patch Leads

2 RJ45 to BT Converters

1 BT Double Privacy Adaptor

Full Instructions

Privacy 4 user version allows 4 CAT5e/CAT6 RJ45 ports to be patched for voice but only 1 outlet can access the telephone line at one time (ALL versions allow 1 port to be patched for ADSL ONLY). Fully compatible with FAX & PDQ machines etc. Ideal if the ADSL line is in your comms room but you would like a wireless router to be plugged in elsewhere for maximum signal strength.

RJ45 to RJ11 Patch Kit-Privacy 4 User Version

Contains 1 ADSL Filter

1 RJ45 to RJ11 Patch Lead

1 RJ45 to RJ11 Converter

4 BT to RJ45 Patch Leads

4 RJ45 to BT Converters

1 BT Quad Privacy Adaptor

Full Instructions

If you have an NTE5 socket fitted with a BT ADSL filtered faceplate or have any other type of filtered master socket and would like to patch the ADSL signal to another location this kit is designed for this, it also provides one filtered outlet at the same location for connection of one telephone. If you would like to patch the voice signal to other (multiple) locations simply use one of our standard RJ45 to BT patch kits in the "PHONE" socket.

RJ45 to RJ11 Patch Kit-Filtered Faceplate Version

Contains 1 RJ45 ADSL Filter

1 RJ45 to RJ11 Patch Lead

Full Instructions

 RJ45 to RJ11 Patch Kit-Port Doubler

Use in conjunction with our RJ11 & BT to RJ45 patch kits(filtered faceplate version excluded). Allows you to use a CAT5e port that is already in use for voice. (ADSL signal requires it's own port). Voice AND computer data* over ONE CAT5e port.

* 100Mb speeds ONLY.

  View all our other products here in the main shop page