Your cart is currently empty

Back to Category

BT Openreach Branded NTE5A Master Socket

PRODUCT CODE: NTE5ORP



This product has been discontinued by the manufacturer, where available alternative products can be found below. This page is for information & reference only!

Replaced by NTE5C MK2.


BT Openreach Branded NTE5A Master Socket

No 26A for improved broadband Latest version that features the filter on the bell wire circuit for IMPROVED ADSL/vDSL performance & WITHOUT 26A surge arrestor which can further IMPROVE ADSL/vDSL speeds!

 

NTE5A type master socket with BT Openreach branding printed on the top left corner (referred to as "Type 1 NTE5"). Facilitates easy testing of the BT line by removal of the front lower faceplate to reveal what is known as the test socket. IDC terminals on the rear connect to the incoming phone line, IDC terminals on the lower front faceplate allow the end user to easily connect internal telephone extension wiring. The NTE5A was previously the most common type of socket that BT Openreach installed (the external versions known as XNTE are now discontinued, the NTE5A is now replaced by the NTE5C), supplied as three pieces (22mm rear back box, rear plate with test socket and front lower plate) with screws & BT Openreach instructions, the socket can be flush mounted to any single gang back box if required. Dimensions (L) 85mm x (W) 85mm x (H) 35.5mm.

Info For ADSL/vDSL installations the lower half of the front faceplate can be replaced with a filtered faceplate such as the NTE2000, NTE2005, BT/Openreach vDSL Faceplate or VTE2015, this will give the same benefits of the bell wire filter with the addition of centralised ADSL/vDSL filtering. (Note, these are known as Service Specific Faceplates (SSFPs). The BT/Openreach vDSL version retains the original NTE5 lower front faceplate).

Key Features

  • Moulded from V0 rated material colour matched to BT 1P white.
  • 2 way IDC connection of incoming network operator’s wiring (LSA style.)
  • Standard linetest and ringing components provided.
  • 401A Test socket to verify network wiring is good.
  • 601A socket for customer’s equipment connection.
  • 3 way IDC connector for onward distribution of customer’s wiring (LSA style).
  • Provides clear demarcation point between network and customer wiring.
  • Can be surface mounted (with backbox) or flush mounted.
  • Bellwire filter provided.
  • Will accept other Service Specific Frontplates (SSFPs) such as the ADSL Centralised Filter.

This product has been discontinued by the manufacturer, where available alternative products can be found below. This page is for information & reference only!

Replaced by NTE5C MK2.

£7.67(£9.20 inc VAT)
DISCONTINUED

Replaced by NTE5C MK2.

BT Openreach Branded NTE5C MK2 Master Socket

PRODUCT CODE: NTE5C

BT Openreach Branded NTE5C MK2 Master Socket

Latest NTE5C MK2 master socket with BT Openreach branding printed on the top left corner. Facilitates easy testing of the BT line by removal of the front lower faceplate to reveal what is known as the test socket. Cam lock connectors on the rear connect to the incoming phone line, cam lock connectors on the front allow the end user to easily connect internal telephone extension wiring. The NTE5C MK2 is the latest type of socket that BT Openreach currently install, supplied as three pieces (22mm rear back box, rear plate with test socket and front lower plate). Note, the socket can be flush mounted to a single gang back box. Dimensions (L) 85mm x (W) 85mm x (H) 35.5mm. No tools are required for the wiring (tool-less IDC connectors).

NTE5C extension connectors

Cam lock connectors for telephone extensions - 2,3 & 5 (front)

NTE5C telephone line connections

Cam lock connectors for incoming telephone line - A & B (rear)

NTE5C lower front plate

Lower front plate

Key Features

  • The front of the NTE5C MK2 includes subtle curves to improve the overall aesthetics but external dimensions remain similar to the previous NTE5A.
  • Now includes labelling on top plane – “Master Socket 5C”.
  • Access the test socket and home wiring terminations without using a screwdriver.
  • The front plate has no connected wires making its removal and replacement wire-free.
  • Tool-less Insulation-Displacement Connector (IDC) wire connection for both network and home wiring.
  • Home wiring termination is now on a secure connector on the face of the back plate.
  • The internal design uses components that are resistant to moisture ingress.
New Product £7.67(£9.20 inc VAT)
In Stock

Your cart is currently empty

You may also be interested in these products...

  • SSL Security Seal
  • SecurityMetrics for PCI Compliance