run-IT-direct phone numberEmail run-IT-direct

UK Website|Home PageHomepage | Shop Online Main Shop Page | Customer Feedback Customer Feedback | Knowledge Base Knowledge Base | Contact Contact

Product Search

BT Openreach™(Printed Version) NTE5A Master Socket

BT Openreach™ Branded (Printed Version) NTE5A Openreach Branded NTE5-2012 Version

Genuine BT Openreach NTE5A Socket

Openreach branded NTE5-click for large picture Click the picture for an ENLARGED view!

No 26A for improved broadband Latest version that features the filter on the bell wire circuit for IMPROVED ADSL/vDSL performance & WITHOUT 26A surge arrestor which can further IMPROVE ADSL/vDSL speeds!

NTE5A type master socket with BT Openreach branding printed on the top left corner (referred to as "Type 1 NTE5"). Facilitates easy testing of the BT line by removal of the front lower faceplate to reveal what is known as the test socket. IDC terminals on the rear connect to the incoming phone line, IDC terminals on the lower front faceplate allow the end user to easily connect internal telephone extension wiring. The NTE5A was previously the most common type of socket that BT Openreach installed (the external versions known as XNTE are now discontinued, the NTE5A is now replaced by the NTE5C), supplied as three pieces (22mm rear back box, rear plate with test socket and front lower plate) with screws & BT Openreach instructions, the socket can be flush mounted to any single gang back box if required. Dimensions (L) 85mm x (W) 85mm x (H) 35.5mm.

Info For ADSL/vDSL installations the lower half of the front faceplate can be replaced with a filtered faceplate such as the NTE2000, NTE2005, BT/Openreach vDSL Faceplate or VTE2015, this will give the same benefits of the bell wire filter with the addition of centralised ADSL/vDSL filtering. (Note, these are known as Service Specific Faceplates (SSFPs). The BT/Openreach vDSL version retains the original NTE5 lower front faceplate).

Key Features

  • Moulded from V0 rated material colour matched to BT 1P white.
  • 2 way IDC connection of incoming network operatorís wiring (LSA style.)
  • Standard linetest and ringing components provided.
  • 401A Test socket to verify network wiring is good.
  • 601A socket for customerís equipment connection.
  • 3 way IDC connector for onward distribution of customerís wiring (LSA style).
  • Provides clear demarcation point between network and customer wiring.
  • Can be surface mounted (with backbox) or flush mounted.
  • Bellwire filter provided.
  • Will accept other Service Specific Frontplates (SSFPs) such as the ADSL Centralised Filter. Address 30 Pendle Way | Washford Park | Meole Village | Shrewsbury | Shropshire | SY3 9QH | Telephone Number 01743 Email

run-IT-direct UK Website VAT Registration Number 869 5716 63 | Privacy | Terms & Conditions | Send Website Feedback Site Feedback