VOIP Voice Reinjection Faceplate/Kit

This kit is specifically designed to cater for the distribution of voice signals following conversion to either full fibre FTTH (Fibre To The Home) or FTTP (Fibre To The Premises) or Digital Voice. The new custom faceplate replaces your existing faceplate, the supplied cable goes between your routers phone socket & the faceplate. If the routers phone socket is RJ11 the supplied adaptor will convert this to a BT socket.

In the case of just Digital Voice where the broadband/voice is still supplied via a copper pair the faceplate replaces your original again. The difference is the broadband router still plugs into the new faceplate. If your broadband router is currently on an extension this can still work but you need a standard telephone socket nearby that is wired back to the master socket for voice reinjection to work. The kit contains : -

• Custom made faceplate that isolates the voice signal from any external network wiring
• Double adaptor, so a phone can be plugged into the new faceplate as well as distributing the signal to all extensions
• 2M BT to BT patch lead
• RJ11 to BT adaptor - for routers that use RJ11 ports for the phone connection

If your existing socket is an NTE5C NO wiring* is required simply clip the new faceplate onto your existing socket!

*If your broadband is on an extension then just two wires need reconnecting. If existing socket is not an NTE5C this is supplied too, wiring instructions included!

Works in a similar way to a SOGEA or VRI faceplate as pictured below.