Your cart is empty
BT to RJ45 Patch Kit-4 Line Version
PRODUCT CODE: RJ45V4L
Easily patch a BT telephone line over RJ45 LAN cabling (CAT5/CAT5e/CAT6 network cabling). Designed for home & office networks where the user wishes to share or move a telephone line without the need for expensive telephone exchanges. Custom manufactured BT to RJ45 plug patch leads connect a standard BT telephone line to the RJ45 sockets (CAT5e/CAT6) on your patch panel; up to a maximum of 4 extensions for each BT line. Various versions are available. Compatible with telephones, FAX & PDQ machines etc & does not affect caller ID.
We are pleased to announce our new BT to RJ45 patch kit that allows up to 4 telephone lines to be patched over one RJ45 (CAT5e/CAT6) cable. Extremely useful for situations where the incoming lines are not in the desired location, eg, located in a patch panel but you need to distribute them to another room via a single network cable. Custom patch lead sets connect up to 4 lines to one cable and convert back to standard BT 431A sockets at the other end.
This item is compatible with multiple ADSL lines. (1) If the modem/router is required at the far end simply remove the ADSL filter(s) from the BT socket(s) & plug in the BT to RJ45 patch lead(s) from the 4 way converter (right hand picture below) directly into the unfiltered BT socket(s), then plug the removed filter(s) into the corresponding BT socket(s) at the far end (left hand picture below). (2)If the modem/router is required at the BT socket(s) end simply plug the patch lead(s) into the BT socket(s) on the ADSL filter(s). The router connects to the filter as normal in both cases.
Contains 1 RJ45 to 4 Way BT 431A plug patch set (Picture on left, flylead approx 3m length which is removable if a short lead is required)
1 RJ45 to 4 Way BT 431A socket patch set (Picture on right-BT patch leads approx 1.5m length)
BT to RJ45 Patch Kit-4 Line RJ45 Version
PRODUCT CODE: RJ45V4LRJ
If your lines are terminated to a patch panel rather than BT sockets we now have a version to cater for this. Also compatible with analogue PBX lines (SLT).
Contains 1 RJ45 to 4 Way BT 431A patch set (Pictured left, flylead approx 3m, removable if a shorter lead required)
1 RJ45 to 4 Way RJ45 socket patch set (Pictured right, patch leads approx 1m length)
Your cart is empty